XS++ 4.1 supports Cid53 flashing and patching in the near future.
All credit goes to Se.nse forum
http://forums.se-nse.net/index.php?s...#entry37 1210
THIS VERSION OF XS DOESN'T SUPPORT DB3150 (K850, W910 etc)
AND IS ONLY AVAILABLE FOR LINUX (Not XP, Vista or anything else)
SO DONT ASK STUPID QUESTIONS.
This is also a beta release so fsx doesn't work.
Version comes in x86 and x64
http://www.sendspace.com/file/o798f5 -x64
http://www.sendspace.com/file/nkqbp8 -x86
_________________________________________________________________________
This Post is From The Lasyk Forum.Posted By Joe0245
(Click To Go to original page)
Monday, August 4, 2008
Monday, July 28, 2008
MyForum.LasyK.net
Im A Power Member of http://myforum.lasyk.net
All The Tutorials ive Posted here is also in LASYK FORUM !!
You can be a member in lasyk forum !! For Solve your sony ericsson mobile phone problems and also other phones like NOKIA,Moto,simens etc !!!
And You can Also Comment In Lasyk forum for my tuts
All The Important tutorials ive done in lasyk
K800i To K810i
Installing Fonts (The Font Ive Used Is SONY SKETCH DONE BY DIEZIL .All Credit goes for him)
Patching With JDFlasher [DB2020]
ThankS !!
Bye Bye
All The Tutorials ive Posted here is also in LASYK FORUM !!
You can be a member in lasyk forum !! For Solve your sony ericsson mobile phone problems and also other phones like NOKIA,Moto,simens etc !!!
And You can Also Comment In Lasyk forum for my tuts
All The Important tutorials ive done in lasyk
K800i To K810i
Installing Fonts (The Font Ive Used Is SONY SKETCH DONE BY DIEZIL .All Credit goes for him)
Patching With JDFlasher [DB2020]
ThankS !!
Bye Bye
Tuesday, July 22, 2008
DB2020 Patching With JDFlasher
DOWNLOAD JDFLASHER
Applying Quick_access patch
you have to follow bellow steps only one time
01. Download a copy of the Main
02. Put the Main (.mbn) file in the Far \ Plugins \ jdflaser \ 2020_52
03. Drag the Main (.mbn) file to the qmaker.exe
04. Allow finish the process. It should not take more than a few seconds.It will create a quick_access.vkp patch like: quick_access_k810_R8BA024.vkp
05.Open Far Manager, press Alt-F1 and select “just gives flasher”
06. Choose “db2020″ from Script section, DCU-60 from port, the maximum speed and click “jump down into a large rabbit-hole”
07. As soon connect your phone and double click on “bflash”
08. It is necessary to reinsert the battery 3 times (it will tell you when to).
09. At the time it is finished, tell Re-falshear the Main. Let’s do it now
10. In the right pane to navigate Far \ Plugins \ jdflasher \ 2020_52
11. Choose your Main (be sure to select the .mbn file and no .vkp File!) Click copy. In the 1st of dialogue do not change anything, just click copy. In the 2nd ensure dialogue “flash babe image” (1 st option) is selected and click flash
12.After Flash has done select the quick_access .VKP patch which is in the Far \ Plugins \ jdflasher \ 2020_52 press and copy. Do not change anything in the 1st dialogue again. In the 2nd dialogue to ensure that “Process vkp patch” is selected and click “flash”. You should take a few seconds
13. You can now apply any patch you want!
14. When you are done, click the 3 points or 2 points (”…”) and select “yes”
Applying vkp Patches
01. Run Far Manager, press Alt-F1 and select “just gives flasher”
02. Choose “qa2020″ from Script section, DCU-60 from port, the maximum speed and click “jump down into a large rabbit-hole”
03. As soon connect your phone and double click on “bflash”
04. Now in the right pane to navigate to the directory where is your .vkp patches
05. Now select any of the vkp patch and press copy. Do not change anything in the 1st dialogue nad click “copy”. In the 2nd dialogue to ensure that “as a vkp patch”(2nd option) is selected and click “yeah, flash it”
06. After few seconds it shows a dialog box that vkp patch execute ok
07. If you want to remove any patch, select any of the vkp patch and press copy. Do not change anything in the 1st dialogue box and click “copy”. In the 2nd dialogue to ensure that “remove patch”(3rd option) is selected and click “yeah, flash it”
08. After few seconds it shows a dialog box that vkp patch execute ok
09. When you are done, click the 3 points or 2 points (”…”) and select “yes”
Now You Can Apply Any Patch at anytime
ORIGINAL POST IN LASYK
Applying Quick_access patch
you have to follow bellow steps only one time
01. Download a copy of the Main
02. Put the Main (.mbn) file in the Far \ Plugins \ jdflaser \ 2020_52
03. Drag the Main (.mbn) file to the qmaker.exe
04. Allow finish the process. It should not take more than a few seconds.It will create a quick_access.vkp patch like: quick_access_k810_R8BA024.vkp
05.Open Far Manager, press Alt-F1 and select “just gives flasher”
06. Choose “db2020″ from Script section, DCU-60 from port, the maximum speed and click “jump down into a large rabbit-hole”
07. As soon connect your phone and double click on “bflash”
08. It is necessary to reinsert the battery 3 times (it will tell you when to).
09. At the time it is finished, tell Re-falshear the Main. Let’s do it now
10. In the right pane to navigate Far \ Plugins \ jdflasher \ 2020_52
11. Choose your Main (be sure to select the .mbn file and no .vkp File!) Click copy. In the 1st of dialogue do not change anything, just click copy. In the 2nd ensure dialogue “flash babe image” (1 st option) is selected and click flash
12.After Flash has done select the quick_access .VKP patch which is in the Far \ Plugins \ jdflasher \ 2020_52 press and copy. Do not change anything in the 1st dialogue again. In the 2nd dialogue to ensure that “Process vkp patch” is selected and click “flash”. You should take a few seconds
13. You can now apply any patch you want!
14. When you are done, click the 3 points or 2 points (”…”) and select “yes”
Applying vkp Patches
01. Run Far Manager, press Alt-F1 and select “just gives flasher”
02. Choose “qa2020″ from Script section, DCU-60 from port, the maximum speed and click “jump down into a large rabbit-hole”
03. As soon connect your phone and double click on “bflash”
04. Now in the right pane to navigate to the directory where is your .vkp patches
05. Now select any of the vkp patch and press copy. Do not change anything in the 1st dialogue nad click “copy”. In the 2nd dialogue to ensure that “as a vkp patch”(2nd option) is selected and click “yeah, flash it”
06. After few seconds it shows a dialog box that vkp patch execute ok
07. If you want to remove any patch, select any of the vkp patch and press copy. Do not change anything in the 1st dialogue box and click “copy”. In the 2nd dialogue to ensure that “remove patch”(3rd option) is selected and click “yeah, flash it”
08. After few seconds it shows a dialog box that vkp patch execute ok
09. When you are done, click the 3 points or 2 points (”…”) and select “yes”
Now You Can Apply Any Patch at anytime
ORIGINAL POST IN LASYK
Saturday, April 5, 2008
How To Install New Fonts To Ur Sony Ericsson Phone
WARNING
IF YOU ARE NOT CONFIDENT IN DOING THIS GUIDE OR BEING ABLE TO REVERSE IT THEN DO NOT ATTEMPT THIS GUIDE! YOU HAVE BEEN WARNED!!!
Things You Need ,
*.Fonts
(Sony_Sketch.v.1.0.9)
All Credit Goes For DIEZIL for Making this awesome font,thumbs up mate ;)
Sony Sketch Original Post In Lasyk By DIEZIL
*.Phone XS++3.1
1.Adding Files to the directory
Image Preview
First Delete all the files in the fonts folder,
then
Drag And Drop The : [Sony_Sketch_EF+Sony_Sketch_EF_Bold+FONTS.xml] To the XS++ (tpa/present/system/fonts)
Then Click ShutDown ...
Then Unplug Ur Phone ...
Thanks ...DIEZIL AND LASYK
Original Post (lasyk)
GoodLuck
IF YOU ARE NOT CONFIDENT IN DOING THIS GUIDE OR BEING ABLE TO REVERSE IT THEN DO NOT ATTEMPT THIS GUIDE! YOU HAVE BEEN WARNED!!!
Things You Need ,
*.Fonts
(Sony_Sketch.v.1.0.9)
All Credit Goes For DIEZIL for Making this awesome font,thumbs up mate ;)
Sony Sketch Original Post In Lasyk By DIEZIL
*.Phone XS++3.1
1.Adding Files to the directory
Image Preview
First Delete all the files in the fonts folder,
then
Drag And Drop The : [Sony_Sketch_EF+Sony_Sketch_EF_Bold+FONTS.xml] To the XS++ (tpa/present/system/fonts)
Then Click ShutDown ...
Then Unplug Ur Phone ...
Thanks ...DIEZIL AND LASYK
Original Post (lasyk)
GoodLuck
Tuesday, April 1, 2008
...::::`Sony Ericsson K800i to K810i`::::....
WARNING
IF YOU ARE NOT CONFIDENT IN DOING THIS GUIDE OR BEING ABLE TO REVERSE IT THEN DO NOT ATTEMPT THIS GUIDE! YOU HAVE BEEN WARNED!!!
YES THIS WILL INVALIDATE YOUR WARRENTY! .. ANY KIND OF MODDING WILL INVALIDATE IT TOO!
First of all ,
Things you need
*Phone XS++
*Main Firmware & Filesystem(Password = kkan)
(The Latest Main firmware+Filesystem | R8BA024 )(There Is a VKP File in The zip (this vkp is to unlock your flashed k810i later on if you want to keep the vkp you can!) , if not just delete that ...no need of that
1>CONNECTIONG THE PHONE
Install The Phone XS++ & Connect The Phone (start turn the phone off remove the memory card and take out the battery for a few seconds ... then replace the battery and connect your USB CABLE first to the phone whilst holding the "C" key down then connect it to your USB PORT (still holding the "C" key!))
Preview Image
2>Flashing MAIN FIRMWARE + FILE SYSTEM & CUSTOMIZATION
Preview Image
>Select the downloaded main firmware & filesystem
>select customize filesystem
Model = k800
Select CDA & Region = EUROPE_2(CDA102511/2)
>Set the options as above & Hit FLASH
##This selection is only for the files i hav mentioned above(R8BA024 - MAIN FIRMWARE + FILESYSTEM)##
After all these processes you will get a massage = Disconnected,Unplug Your Phone
>Then Unplug Your Phone ,Remove the battery & reinsert it .Then Turn On The Phone ....
Now U hav Ur new k810i
Thats all,
ThankS Kobrakaan in LasyK For the Quotations+Links
Thanks Solidsnake204 for the live guide :P
If you hav any problem please post it here or add me on MSN = tmdrockz@hotmail.com
ORIGINAL POST IN LASYK
IF YOU ARE NOT CONFIDENT IN DOING THIS GUIDE OR BEING ABLE TO REVERSE IT THEN DO NOT ATTEMPT THIS GUIDE! YOU HAVE BEEN WARNED!!!
YES THIS WILL INVALIDATE YOUR WARRENTY! .. ANY KIND OF MODDING WILL INVALIDATE IT TOO!
First of all ,
Things you need
*Phone XS++
*Main Firmware & Filesystem(Password = kkan)
(The Latest Main firmware+Filesystem | R8BA024 )(There Is a VKP File in The zip (this vkp is to unlock your flashed k810i later on if you want to keep the vkp you can!) , if not just delete that ...no need of that
1>CONNECTIONG THE PHONE
Install The Phone XS++ & Connect The Phone (start turn the phone off remove the memory card and take out the battery for a few seconds ... then replace the battery and connect your USB CABLE first to the phone whilst holding the "C" key down then connect it to your USB PORT (still holding the "C" key!))
Preview Image
2>Flashing MAIN FIRMWARE + FILE SYSTEM & CUSTOMIZATION
Preview Image
>Select the downloaded main firmware & filesystem
>select customize filesystem
Model = k800
Select CDA & Region = EUROPE_2(CDA102511/2)
>Set the options as above & Hit FLASH
##This selection is only for the files i hav mentioned above(R8BA024 - MAIN FIRMWARE + FILESYSTEM)##
After all these processes you will get a massage = Disconnected,Unplug Your Phone
>Then Unplug Your Phone ,Remove the battery & reinsert it .Then Turn On The Phone ....
Now U hav Ur new k810i
Thats all,
ThankS Kobrakaan in LasyK For the Quotations+Links
Thanks Solidsnake204 for the live guide :P
If you hav any problem please post it here or add me on MSN = tmdrockz@hotmail.com
ORIGINAL POST IN LASYK
Subscribe to:
Posts (Atom)
